One of our larger memorial vases, the Crown, is befitting royalty. With its touch of Christian symbolism, the Crown creates an air of respect around the monument. A subtle band featuring distinct etchings, highlight the intricate designs of the lower vase which lead to a wide base. Timeless, the Crown is a tribute which will reign into the future.
Vase Size: 11 1/4″ x 4 7/8″
Liner: 7″ x 3″
Flowers not included.
Fastener Installation Methods
Upright Metalcraft cemetery memorial flower vases have different ways to be attached to a memorial; lug, strap, tape, and Cor-Loc (for in ground).
A rosette with one 5/16″ x 1-1/2″ threaded lug is screwed and epoxied into a hole drilled in the memorial base. The vase is then screwed down onto the rosette. The vase can be removed by unscrewing it from the rosette, or securely attached by adding Loc-Tite to the threads before screwing the vase down.
A heavy gauge stainless steel strap bolts to the bottom of the vase and inserts between the die and the base of the monument. The vase cannot be removed without moving the die. A perfect solution.
Double sided tape is used between the vase and the memorial. The tape requires a polished surface on the granite and the high-strength tape requires 100 lbs. of force to break the seal. Weatherproof, easy to mount, and permanent.
Cor-Loc® Installation Method
Is a simple solution to mounting a Lawn/Flush ground unit assembly to a granite marker. From underneath, the Cor-Loc® slides over the PVC canister and into the core hole of the marker, filling the gap between the PVC canister and granite. When wedged in, the Cor-Loc® acts as a compression, fitting securely fastening the ground unit to the granite marker. Quick, easy, and no messy epoxies.
Disconnect and remove the vase from the In-Gound unit before installation. Position In-Ground unit in core hole.
Place a piece of cardboard or carpet underneath to protect the face of the marker. Slide the Cor-Loc® over the In-Ground unit PVC canister and into the core hole.
With a hammer, drive the Cor-Loc® securely into the gap between the PVC Canister and granite. Alternate strikes to keep the Cor-Loc® level. Continue to drive the Cor-Loc® in as far as possible.
Approximately 1″ of the Cor-Loc® unit will be showing. Place the marker into position and reconnect the vase to the chain. Installation is now complete.